Wednesday, March 24, 2010

iChat connection issues: Undefined AIM Socket Error

Problem:
iChat is unable to connect:


Solution:
[Assuming you have internet connectivity]
Check your System Firewall settings;
(Directions from Mac OS 10.6; earlier versions are similar)

Click ‘System Preferences’,
Click ‘Security’,
Select the ‘Firewall’ tab,
If the padlock is closed, click it to enter the administrator password,


Click ‘Advanced’,
Insure ‘Block all incoming connections' is not checked.
Scroll down to ‘iChat’ and ‘iChatAgent’ listings,
Click each listing at the arrows (right-hand edge) and select ‘Allow incoming connections’.


Click ‘OK’,
Close System Preferences,
Quit iChat, if running, and try running iChat now.

If you receive the same error,  check additional software firewalls (McAfee, Norton, etc.)

Check any hardware firewalls such as routers; try bypassing the router it eliminate that as an issue. 
Note: cable modems require unplugging its power to release the device’s address it was communicating with. (unplug the modem, and plug it back-in when switching between routers and computers.) 
Further, when using a VOIP, or Digital Voice (cable phone) modem, you must pull the backup battery, or push the reset button hidden through a pinhole in back to actually reset it.

….

Additional Norton 2010 Firewall help:
Run Norton Firewall,
Select ‘Firewall Settings’



Is Connection Blocking On? -No, Skip to Application Blocking below.

-Yes, Connection Blocking is On; Click ‘Configure…’, Scroll down below the listing for ‘iChat’ the line should read ‘Allow    All other connections’, if not click on the 'Block    All other connections’ line to highlight, and Click ‘Edit’, Select ‘Allow’ from the drop down menu.




Is Application Blocking On? -No, 

-Yes, Application Blocking is On; Click ‘Configure…’, Scroll down to the ‘iChat’ and ‘iChatAgent’ listings, and insure ‘allow’ is selected. (Double arrows at right of each listing toggles the setting.)


Click ‘Done’
Quit Norton Firewall.
Quit iChat, if running, and try running iChat now.


Tuesday, March 23, 2010

windows unresponsive, displays an error on restore.

Before re-installing, again, try this:


Symptom:
The computer freezes (locks up, or stops responding) on boot-up.

Possible Solution:
Reboot holding down 'Fn' and 'F8' keys and select 'Safe-Boot' then try restoring the system to an earlier time.


Monday, March 22, 2010

Configuring USB printers to Apple Airport Base Station with windows 7

From the previous post:

After troubleshooting an entire day, I was able to connect a HP PSC 2110 printer plugged into an Apple Airport Base Station (wireless router/hard drive) and print from an old Dell running windows XP, and a new MacBook Pro running windows 7.

The Apple laptop (while running Mac OS 10.6) printed as soon as I joined the wireless network, so I knew the network, printer, and computer were operating properly.
However, booting the Apple laptop into windows 7 (ultimate edition) was a different story.
The machine failed to see the printer; it would surf the net fine, but no printer.
The same held true for the Dell (windows XP); surfed OK, no printer available.
After Googling around for a  quick  fix, I began to troubleshoot:

This is the result of that nightmare...

windows 7:
Click to configure USB printers to Apple Airport Base Station with windows XP.





[SECTION 1]  Preliminary.

If using multiple computers, work with one at a time.

Verify you have web connectivity. (If not, correct this before proceeding.)

Install the printer directly to the computer following the printers directions; run the disk, or download the software from the manufacturers site. (This insures the drivers are resident on the machine.)

Print a test page.
Printed?  Good.

Take a deep breath.
Unplug the printer USB cable from the computer, and plug it into the Airport Base Station.

Disable your firewall software. (EX: Norton, McAfee, windows, etc... This is temporary.)

[SECTION 2]  Adding the printer.

Click 'Start' (windows marble),
Select 'Devices and Printers',
Click 'Add a printer'.

The Add Printer Wizard starts up,
Click 'Next',
Select 'Add a local printer', (Yes, Local. NOT network, wireless or Bluetooth.)
Choose 'Create a new port', and select 'Standard TCP/IP Port'


Click 'Next',
Enter the Airport Base Station's IP Address (Default is 10.0.1.1),
Choose a port, and change the Port name to reflect the new port (9100, 9101 worked for me, or 9202),


Click 'Next',
Select 'Custom', and Click 'Settings',
Change the Raw Settings Port Number to your selected port,


Click 'OK',
Click 'Next',

[SECTION 3]  Installing the printer driver.

Select your printers manufacturer from the list at left.
Select your printers model from the list at right.


(If the model isn't listed, Click the 'Windows Update' button to download more from the web; be patient, this may take several minutes, depending on internet and processor speed....)

(If the model still isn't listed, pick the closest one; this will be replaced later with the pre-installed one.)

Click 'Next',

(If asked to choose whether to keep existing driver, or replace, keep existing, unless your compelled to choose otherwise.., and Click 'Next')

Change the printer name.   EX: yourprintername (Wireless)
Select default or not,
Click 'Next'
Select 'Do not share this printer' (as it will be networked),
Click 'Next', continue on to...

[SECTION 4]  Tuning the printer driver.




Click 'Print Test Page';

-Prints?; Yes? Click 'Finish' (or 'OK'); continue at [section 7].

No test print?; Click 'Finish', (or 'OK'),
Click 'Start' (windows marble)
Select 'Devices and Printers'
Right-Click your new printer icon, and select 'Printer Properties',
Choose the 'Advanced' tab,
Look at the listed Driver:


Does it match your printer's model?
If YES; the listed driver matches your printer model, continue at [section 5].

If NO, select the printer from the drop-down list,
Click 'OK',
Click the 'General' tab,
Click 'Print Test Page'; -Prints?; -Yes? Click 'Finish' (or 'OK'); continue at [section 7].

No test print?; Continue on to...


[SECTION 5]  Tweaking the printer driver.

Click the 'Ports' tab,
Uncheck 'Enable bidirectional support',
Click the 'General' tab,
Click 'Print Test Page',

     Prints?; -Yes? Click 'Finish' (or 'OK'); continue at [section 7].

No test print?; Click the 'Ports' tab,
Check 'Enable bidirectional support',
The highlighted port in the list should be your newly added port,
Click 'Configure Port',
Change the port number to 9100, or 9101, or 9202 and modify the Port Name to reflect the new port number,
Click 'OK',
Click the 'General' tab,
Click 'Print Test Page',

     Prints?; -Yes? Click 'Close'; continue at [section 7].

No test print?
Repeat trying all the ports in [SECTION 5]

If all ports fail;


[SECTION 6]  Brute Force

Close any open windows.
Click 'Start' (windows marble),
Select 'Devices and Printers',
Right-Click on the new, non-working printer we tried to setup, and select 'Remove device',

Click 'Add a printer'
Click 'Add a network, wireless or Bluetooth printer',


If by some miracle, the printer actually appears, try it, I'll wait here.

Click 'The printer that I want isn't listed'
Click 'Add a printer using a TCP/IP address or hostname',
Click 'Next',
Select the device type 'TCP/IP Device'
Enter the Airport IP address (The default is 10.0.1.1)

Add something like "Jet Direct" to the Port name,


Click 'Next',
Select 'Hewlett Packard Jet Direct' (The actual printer brand doesn't matter at this point, its just a printing format.)
Click 'Next',
Refer back to [Section 3] for tuning and tweaking....

{If after trying all listed ports, and the generic driver, you are unable to print, we suggest posting to the manufacturers forums for further help.}


[SECTION 7]  Completion.

Re-enable your firewall.
Try printing,

     Prints?; -Yes? Great, you're done with this machine.

No, not printing? Open the port you configured in your firewall software.

For example, if you've installed the current (2010) Norton Security Suite, you would run the program, hover the cursor over 'PC Security' and select 'Manage Firewall',


Select the 'Traffic Rules' tab,


Click 'Add',
Select 'Allow', Click 'Next',
Select 'Connections to and from other computers', Click 'Next',
Select 'Any computer in the local subnet' Click 'Next',
Select protocol to allow 'TCP',
Select 'Only communications that match all types and ports listed below',
Click 'Add',
Select 'Individually specified ports',
Select 'Local',
Enter your printer port (9100, 9101, 9202) you configured, Click 'Next',
Select 'Create an event log entry',
Select 'Apply this rule', Click 'Next',
Rename the rule (EX: Wireless Printing Port XXXX), Click 'Next'
Click 'Finish', Click 'Apply', Click 'Close'

{Please refer to your firewall software support network for its specifics}





Configuring USB printers to Apple Airport Base Station with windows XP

After troubleshooting an entire day, I was able to connect a HP PSC 2110 printer plugged into an Apple Airport Base Station (wireless router/hard drive) and print from an old Dell running windows XP, and a new MacBook Pro running windows 7.


The Apple laptop (while running Mac OS 10.6) printed as soon as I joined the wireless network, so I knew the network, printer, and computer were operating properly.
However, booting the Apple laptop into windows 7 (ultimate edition) was a different story.
The machine failed to see the printer; it would surf the net fine, but no printer.
The same held true for the Dell (windows XP); surfed OK, no printer available.
After Googling around for a  quick  fix, I began to troubleshoot:


This is the result of that nightmare...




windows XP:
Click to configure USB printers to Apple Airport Base Station with windows 7.


[SECTION 1]

If using multiple computers, work with one at a time.

Verify you have web connectivity. (If not, correct this before proceeding.)

Install the printer directly to the computer following the printers directions; run the disk, or download the software from the manufacturers site. (This insures the drivers are resident on the machine.)

Print a test page.
Printed?  Good.

Take a deep breath.
Unplug the printer USB cable from the computer, and plug it into the Airport Base Station.

Disable your firewall software. (EX: Norton, McAfee, windows, etc... This is temporary.)



[SECTION 2]

Click 'Start',
Select 'Printers and Faxes',
Click 'Add Printer'.

The Add Printer Wizard starts up,
Click 'Next',
Select 'Local Printer',
Uncheck 'Automatically detect and install my Plug and Play printer'. (Yes, Local. NOT network.)



















Click 'Next',
Select 'Create a new port',



















Choose 'Standard TCP/IP Port' from the drop-down menu,


















Click 'Next'.
The Add Standard TCP/IP Port Wizard starts, click 'Next'.
Enter the Airport Base Station IP address (Default is 10.0.1.1)
Add (or change) the port number to 9100, or 9101 worked for me, or 9202 and modify the Port Name to reflect the new port number:


















Click 'Next',
Select 'Custom',
Click 'Settings'
Change the Raw Settings Port Number to reflect your port number, and Click 'OK',






















Click 'Next'.
Click 'Finish'
Select your printer's manufacturer from the list on the left.
Select your printer's model from the list on the right.


















(If the model isn't listed, Click the 'Windows Update' button to load more from the web; be patient, this may take several minutes, depending on internet and processor speed....)

(If the model still isn't listed, pick the closest one; this will be replaced later with the pre-installed one.)

Click 'Next',
(If asked to choose whether to keep existing driver, or replace, keep existing, unless your compelled to choose otherwise.., and Click 'Next')

Change the printer name.   EX: yourprintername (Wireless)
Select default or not,
Click 'Next'
Select 'Do not share this printer' (as it will be networked),
Click 'Next', continue on to...


[SECTION 3]

Click 'Print Test Page'; -Prints?; Yes? Click 'Finish' (or 'OK'); continue at [section 5].

No test print?; Click 'Finish', (or 'OK'),
Click 'Start'
Select 'Printers and Faxes'
Right-Click your new printer icon, and select 'Properties',
Choose the 'Advanced' tab,
Look at the listed Driver:






















Does it match your printer's model?

If YES; the listed driver matches your printer model, continue at [section 4].

If NO, select the printer from the drop-down list,
Click 'OK',
Click the 'General' tab, Start again at [section 3].


[SECTION 4]

Click the 'Ports' tab,
Uncheck 'Enable bidirectional support',
Click the 'General' tab,
Click 'Print Test Page',


     Prints?; -Yes? Click 'Finish' (or 'OK'); continue at [section 5].

No test print?; Click the 'Ports' tab,
Check 'Enable bidirectional support',
The highlighted port in the list should be your newly added port,
Click 'Configure Port',
Change the port number to 9100, or 9101, or 9202 and modify the Port Name to reflect the new port number,
Click 'OK',
Click the 'General' tab,
Click 'Print Test Page',

     Prints?; -Yes? Click 'Close'; continue at [section 5].

No test print?
Start over again at [SECTION 4]  {If after trying all listed ports, you are unable to print, we suggest posting to the manufacturers forums for further help.]





[SECTION 5]

Re-enable your firewall.
Try printing,

     Prints?; -Yes? Great, you're done with this machine.

No printing? Open the port you configured in your firewall software.

For example, if you've installed the current (2010) Norton Security Suite, you would run the program, hover the cursor over 'PC Security' and select 'Manage Firewall',

















Select the 'Traffic Rules' tab,


















Click 'Add',
Select 'Allow', Click 'Next',
Select 'Connections to and from other computers', Click 'Next',
Select 'Any computer in the local subnet' Click 'Next',
Select protocol to allow 'TCP',
Select 'Only communications that match all types and ports listed below',
Click 'Add',
Select 'Individually specified ports',
Select 'Local',
Enter your printer port (9100, 9101, 9202) you configured, Click 'Next',
Select 'Create an event log entry',
Select 'Apply this rule', Click 'Next',
Rename the rule (EX: Wireless Printing Port XXXX), Click 'Next'
Click 'Finish', Click 'Apply', Click 'Close'

{Please refer to your firewall software support network for its specifics}




Click to configure USB printers to Apple Airport Base Station with windows 7.



Wednesday, February 17, 2010

Entry-level Cable FAQ



Video:
From older, poorer to newer; better.

Coax (standard issue screw-on connectors) analog video and audio

Composite (yellow -video, red -right audio, white -left audio) analog

Component (red; blue; green -video, red -right audio, white -left audio) analog

DVI (Digital Video Interface) video only.

HDMI (Hi-Definition Multimedia Interface) digital video; Includes digital audio unless adapted from DVI.



Audio:

From older, poorer to newer better*.


Coax (screw-on connectors) -analog

Composite/Component -analog

Coax (usually orange RCA push-on connector) -digital

Optical -digital



*Note:
Some Audio/Videophiles insist analog is superior to digital, as digital is sampled.
This becomes less of a problem as sample rates increase.
-Most people cannot tell the difference.

comcast platinum remote issue

New remotes have surfaced for comcast subscribers.

These remotes are identical to the previous remotes, but are darker gray ‘platinum’ ones.

These remotes are designed to operate the newer motorola (black) 250GB DVRs and comcast branded motorola addressable (black, smaller) Hi-Def/Digital convertors.

To allow operation of the older equipment;
Press and release the ‘Cable’ button.
Press and hold ‘Setup’ until the cable light blinks twice.
Enter ‘9 8 2’ [the remote should blink four times].
Enter ‘0 1 3 7 6’.
The remote should now operate the older comcast boxes.
(They still operate the newer equipment BTW.)



To reset your remote to comcast defaults:
Press and release the ‘Cable’ button.

Press and hold ‘Setup’ until the cable light blinks twice.
Enter ‘9 8 0’ [the remote should blink four times].

The remote will be in the new comcast-issued state.


*** Please note, entering ‘9 8 1’ in the above instructions will perform a factory reset, erasing the comcast defaults. -not reversible. ***


Monday, January 25, 2010

Comcast offers free Norton Anti-Virus for Macintosh to its internet subscribers

Comcast US has switched vendors from McAfee to Norton Anti-Virus, and now offers the Norton Suite free to its Apple Macintosh subscribers.

Including Norton Anti-Virus, their own version of a Firewall, Phishing protection, and Norton Confidential which protects your personal data.

Login to Comcast with your eMail address, and password, click 'More...' option (down the left-hand side of the screen) and click 'Computer Security...' to goto the information page to download.

Reboot as directed, then run 'LiveUpdate' from Applications > Symantic Solutions to download the latest updates.

Thursday, January 21, 2010

Syncing: iPhone <> iCal <> Google Calendar <> windows outlook 2007

Syncing Apple's iPhone calendar to Apple's iCal (internet calendar program) works as advertised.

However, attempting to sync with Google's calendar, and outlook 2007 proved inconsistent at best.
I had been using iCal without issue, but have been asked on several occasions for help with Gmail / outlook.

After a couple days of troubleshooting, I found the easiest answer was to be centered on Google's calendar, with everything else syncing with the gmail (Google eMail) account / password.
[Gmail is a free email / calendar service and provides over 7GB of storage.]




Google Calendar Sync is a freeware windows program (background process) which will sync Google's calendar to microsoft outlook at a specified interval. (outlook for Mac hasn't been released yet.)















Setting up Google calendar (and syncing to iCal):
1) Export your iCal calendar.
                (Run iCal, click 'View' click 'Show Calendar List' if it isn't already, then click to highlight your calendar on the left margin, click 'File', select 'Export...', and note where the file is saved.)

Note: You can combine multiple calendars by exporting them individually, and then importing them after selecting your primary calendar you want from the left iCal margin.


2) Login to Gmail, click Calendar. (upper-left corner of the webpage)
                Go through the two second setup for the calendar if you haven't created one.

3) Click 'Settings' under 'My Calendars' in the left margin, and click 'Choose File' from the resulting dialog box.

4) Choose your previously exported iCal calendar from its download location. (Step 1)

Your calendar is now on Google.


5) Once the chosen calendar is imported, run iCal, click 'Preferences' and select 'Accounts'; in the resulting dialog box, click the little plus sign to add your Gmail address and password.

Your calendar is now syncing to iCal.


6) Once the calendar appears (under your email address in iCal's left margin), you can compare it to your original by checking the boxes next to each account in the left margin.

Note: You can delete the original you had exported earlier, as the new Gmail one is a duplicate (master), otherwise, leave it unchecked to avoid seeing the duplicate entries.



Syncing Google calendar to Apple's iPhone:
Click 'Settings'
select 'Mail, Contacts, Calendars'.
Add your Gmail account if you haven't already.
Select the Gmail account, click the 'Calendars' switch to 'On'

Note: Google offers "push" for calendars, selecting 'Push' from the 'Fetch New Data' option (under the Accounts listing for the 'Mail, Contacts, Calendars' setting), will provide faster syncing, at the cost of slight battery expense.



Your calendar entries will appear on your iPhone, iCal, Google calendar, and outlook after the specified allotted time set to sync by the individual programs.



...what a mess, time for a drink.

Wednesday, January 20, 2010

Miss You.


 

Tuesday, January 5, 2010

Issue: Error '1311' when attempting to install microsoft office...

When upgrading microsoft office, installation fails with a 'Error 1311' (cabinet source file not found).
Apparently, microsoft detects an older version and refers to the wrong install CD.


Uninstall the older version before attempting to re-install. (Assuming you have the same suite of programs...)

Otherwise:
microsoft's help here.

FixYa's SKU111 help here.